Lexmark XM3250 User Manual Download

Page: 55 / 289

Faxing

Setting up the printer to fax

Notes:

•

The following connection methods are applicable only in some countries or regions.

•

During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch

Continue

•

If the fax function is enabled and not fully set up, then the indicator light may blink red.

Warning—Potential Damage:

Do not touch cables or the printer in the area shown while actively sending or

receiving a fax.

Supported fax

Printer model

Analog fax

etherFAX

Fax server

Fax over IP (FoIP)

MB2650ade

MB2650adwe

MX622ade

MX622adhe

MX622de

Needs a subscription. For more information, go to

https://www.etherfax.net/lexmark

or contact the place where

you purchased the printer.

Needs an installed license bundle. For more information, contact the place where you purchased the printer.

Faxing

Summary of Contents for XM3250


































































































































































































































































































Search results

Summary of Contents for XM3250

Reviews:

Related manuals for XM3250

Brands by name

Popular brands

Lexmark XM3250, User Manual

Search results

Summary of Contents for XM3250

Reviews:

Related manuals for XM3250

Brands by name

Popular brands