Power button is not lit
These are possible solutions. Try one or more of the following:
P
RESS
POWER
BUTTON
Make sure the printer is on by pressing
.
D
ISCONNECT
AND
RECONNECT
THE
POWER
CORD
1
Disconnect the power cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply on the printer.
1
2
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the
light is not on, press
.
Software did not install
If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as
a printer option when sending a print job, you can try uninstalling and reinstalling the software.
These are some other possible solutions. Try one or more of the following:
M
AKE
SURE
YOUR
OPERATING
SYSTEM
IS
SUPPORTED
The following operating systems are supported: Windows Vista, Windows XP, Windows 2000 with Service Pack 3
or later, and Mac OS X versions 10.5, 10.4 and 10.3.
C
HECK
THAT
YOUR
COMPUTER
MEETS
THE
MINIMUM
SYSTEM
REQUIREMENTS
LISTED
ON
THE
PRINTER
BOX
C
HECK
THE
USB
CONNECTION
1
Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
USB symbol.
Troubleshooting
131
Summary of Contents for X7675
Page 1: ...7600 Series User s Guide 2008 www lexmark com...
Page 2: ......
