Use
To
Color Balance
Cyan - Red
Magenta - Green
Yellow - Blue
Enable an equal balance of colors in the scanned image.
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Specify which color to drop during scanning and to adjust the dropout setting for
each color threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Contrast
0–5
Best for content
Specify the contrast of the output.
Note:
Best for content is the factory default setting.
Mirror Image
Off
On
Create a mirror image of the original document.
Note:
Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note:
Off is the factory default setting.
Shadow Detail
‑
4 to 4
Adjust the amount of shadow detail visible on a scanned image.
Note:
0 is the factory default setting.
Scan edge to edge
Off
On
Specify whether the original document is scanned edge-to-edge.
Note:
Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness of a scanned image.
Note:
3 is the factory default setting.
Temperature
‑
4 to 4
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Note:
0 is the factory default setting.
Understanding the printer menus
178
Summary of Contents for MX910 Series
