5
Close the scanner cover to stick the ADF scan pad to the cover, and then open the cover.
6
Push the corners of the ADF scan pad to secure it into place.
7
Close the scanner cover.
Moving the printer
CAUTION—POTENTIAL INJURY:
The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
Before moving the printer
CAUTION—POTENTIAL INJURY:
Before moving the printer, follow these guidelines to avoid personal injury or
printer damage:
•
Turn off the printer, and then unplug the power cord from the electrical outlet.
•
Disconnect all cords and cables from the printer.
•
If the printer does not have a caster base but is configured with optional trays, then remove the trays.
•
Use the handholds located on both sides of the printer to lift it.
•
Make sure your fingers are not under the printer when you set it down.
•
Make sure there is adequate clearance around the printer.
•
Use only the power cord provided with this product or the manufacturer’s authorized replacement.
Warning—Potential Damage:
Damage to the printer caused by improper moving is not covered by the printer
warranty.
Maintaining the printer
237
Summary of Contents for MX910 Series
