‑
On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or
more of the following:
•
From the printer control panel, press
to continue printing.
Note:
The printer discards any data received through the parallel port.
•
Set the Parallel Buffer to Auto.
–
If the printer is on a network, then access the Embedded Web Server.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
Print a network setup page or menu settings page, and then locate the IP address in the
TCP/IP section.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click
Settings
>
Network/Ports
>
Parallel
.
3
In the Parallel Buffer field, enter
2
.
4
Click
Submit
.
–
If the printer is connected to a computer by a USB or parallel cable, then access the Parallel menu
through the Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.
Standard network software error [54]
‑
On
‑
On
Troubleshooting
132
