‑
On
‑
Blinking
If the light sequence matches the light sequence in the preceding illustration, then press
twice to see
the supplemental light sequence.
‑
On
‑
On
‑
Blinking
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or
more of the following:
•
Check if the imaging unit is missing. If missing, then install the imaging unit.
For more information, see the instruction sheet that came with the supply.
•
If the imaging unit is installed, then remove and reinstall the unresponsive imaging unit.
Note:
If the message appears after reinstalling the supply, then replace the imaging unit. The
imaging unit may be defective or a non
‑
genuine Lexmark supply. For more information, see
genuine Lexmark parts and supplies” on page 81
.
Troubleshooting
117
