In Windows 8
From the Search charm, type
run
and then navigate to:
Apps list >
Run
> type
D:\setup.exe
>
OK
In Windows 7 or earlier
1
Click
, or click
Start
and then click
Run
.
2
In the Start Search or Run dialog, type
D:\setup.exe
.
3
Press
Enter
, or click
OK
.
Note:
D
is the letter of your CD or DVD drive.
c
Click
Install
.
d
Follow the instructions on the computer screen.
e
Select
Advanced
, and then click
Continue
.
f
From the Configure Printer Connection dialog, select a port.
g
If the port is not in the list, then click
Refresh
, or navigate to:
Add port
> select a port type > enter the necessary information >
OK
h
Click
Continue
>
Finish
.
3
Set the COM port parameters.
After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.
Note:
Make sure the serial parameters in the COM port match the serial parameters you set in the printer.
a
Open Device Manager.
In Windows 8
From the Search charm, type
run
and then navigate to:
Apps list >
Run
> type
devmgmt.msc
>
OK
In Windows 7 or earlier
1
Click
, or click
Start
and then click
Run
.
2
In the Start Search or Run dialog, type
devmgmt.msc
.
3
Press
Enter
, or click
OK
.
b
Double
‑
click
Ports (COM & LPT)
to expand the list of available ports.
c
Do either of the following:
•
Press and hold the COM port where you attached the serial cable to your computer (example: COM1).
•
Right
‑
click the COM port where you attached the serial cable to your computer (example: COM1).
d
Click
Properties
.
e
On the Port Settings tab, set the serial parameters to the same serial parameters set in the printer.
Check the serial heading of the menu settings page for the printer settings.
f
Click
OK
, and then close all the dialogs.
g
Print a test page to verify printer installation.
Using M3150
96
