manualshive.com logo in svg

Lexmark M3150, User Manual

The Lexmark M3150 is a high-performance multifunction printer designed for efficiency and productivity. Its robust specifications include fast print speeds, versatile paper handling, and exceptional image quality. Unlock the full potential of this device by downloading the free user manual from manualshive.com, offering comprehensive instructions to optimize your printing experience.

Share
Download
background image

Use

To

Print Area

Normal
Whole Page

Set the logical and physical printable area.

Notes:

•

Normal is the factory default setting. When attempting to
print data in the non

‑

printable area defined by the Normal

setting, the printer clips the image at the boundary.

•

Whole Page allows the image to be moved into the
non

‑

printable area defined by the Normal setting. This

setting affects only pages printed using a PCL 5e interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.

Download Target

RAM
Flash

Set the storage location for downloads.

Notes:

•

RAM is the factory default setting. Storing downloads in the
RAM is temporary.

•

Storing downloads in a flash memory or on a printer hard
disk places them in permanent storage. Downloads remain in
the flash memory or printer hard disk even when the printer
is turned off.

•

This menu item appears only when a flash or disk option is
installed.

Resource Save

On
Off

Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more memory than is available.

Notes:

•

Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.

•

On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then 

Memory Full 38

 appears on the printer

display, but downloads are not deleted.

Print All Order

Alphabetical
Oldest First
Newest First

Specify the order in which held and confidential jobs are printed
when Print All Order is selected.

Note: 

Alphabetical is the factory default setting.

Understanding the printer menus

155

Summary of Contents for M3150

































































































































































































































































Reviews:

No comments

Related manuals for M3150

Canon RP10 User Manual preview
RP10
Brand: Canon Pages: 37
Xerox Phaser 7800 Installation Manual preview
Phaser 7800
Brand: Xerox Pages: 2
Xerox Phaser 3600 Voluntary Product Accessibility Template preview
Phaser 3600
Brand: Xerox Pages: 11
Xerox CiPress 325 Customer Help Information preview
CiPress 325
Brand: Xerox Pages: 192
Xerox Phaser 6100 Instructions Manual preview
Phaser 6100
Brand: Xerox Pages: 10
Xerox DocuPrint N24 Function Manual preview
DocuPrint N24
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7425 Quick Use Manual preview
WORKCENTRE 7425
Brand: Xerox Pages: 88
Xerox PHASER 8560MFP Supplementary Manual preview
PHASER 8560MFP
Brand: Xerox Pages: 10
Xerox ColorQube 9203 Quick Manual preview
ColorQube 9203
Brand: Xerox Pages: 33
Xerox C123 Copycentre Quick Reference Manual preview
C123 Copycentre
Brand: Xerox Pages: 154
Xerox WorkCentre 5845 Installation And Operation Manual preview
WorkCentre 5845
Brand: Xerox Pages: 14
Lanier LD225 Function Manual preview
LD225
Brand: Lanier Pages: 138
Lanier LD225 Fax Manual preview
LD225
Brand: Lanier Pages: 236
Printek DP-530si Operator'S Manual preview
DP-530si
Brand: Printek Pages: 34
Aficio MP1900 Service Manual preview
MP1900
Brand: Aficio Pages: 188
Ricoh SG 7100DN Installation Manual preview
SG 7100DN
Brand: Ricoh Pages: 17
Xerox WorkCentre 6400XF Evaluator Manual preview
WorkCentre 6400XF
Brand: Xerox Pages: 24
Oki ColorPainter M-64S User Manual preview
ColorPainter M-64S
Brand: Oki Pages: 84

Brands by name

Popular brands

Load more brands