5
From any menu in the Administrative Menus, Management, or Function Access sections, select
User PIN
Protected
,
Admin PIN Protected
, or
Admin PIN and User PIN Protected
.
Note:
Using Admin PIN, you can still access a menu assigned with User PIN.
6
Click
Submit
.
If you try to access a PIN
‑
protected menu from the printer control panel, then the printer will require you to enter the
PIN.
Note:
After you enter the last digit of the PIN, make sure to press
from the printer control panel for more than
three seconds.
Printing a menu settings page
From the home screen, navigate to:
>
Reports
>
Menu Settings Page
Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
From the home screen, navigate to:
>
Reports
>
Network Setup Page
2
Check the first section of the network setup page, and confirm that the status is
Connected
.
If the status is
Not Connected
, then the LAN drop may not be active, or the network cable may be malfunctioning.
Consult a system support person for a solution, and then print another network setup page.
Checking the status of parts and supplies
A message appears on the printer display when a replacement supply item is needed or when maintenance is required.
Checking the status of parts and supplies on the printer control panel
From the home screen, touch
Status/Supplies
>
View Supplies
.
Checking the status of parts and supplies from the Embedded Web Server
Note:
Make sure the computer and the printer are connected to the same network.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click
Device Status
>
More Details
.
Using M3150
101
