manualshive.com logo in svg

Lexmark M3150, User Manual

The Lexmark M3150 is a high-performance multifunction printer designed for efficiency and productivity. Its robust specifications include fast print speeds, versatile paper handling, and exceptional image quality. Unlock the full potential of this device by downloading the free user manual from manualshive.com, offering comprehensive instructions to optimize your printing experience.

Share
Download
background image

Univers

Linotype-Hell AG and/or its subsidiaries

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could
void the user's authority to operate this equipment.

Note: 

To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,

use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach or 1021294 for
USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC
regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232–3000

Modular component notice

Wireless

‑

equipped models contain the following modular component(s):

Lexmark Regulatory Type/Model LEX-M01-005; FCC ID:IYLLEXM01005; IC:2376A-M01005

Licensing notices

All licensing notices associated with this product can be viewed from the root directory of the documentation CD.

Notices

237

Summary of Contents for M3150

































































































































































































































































Reviews:

No comments

Related manuals for M3150

SPRT SP-T6 User Manual preview
SP-T6
Brand: SPRT Pages: 28
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
Océ VarioPrint 1055 User Manual preview
VarioPrint 1055
Brand: Océ Pages: 194
Oce CS9360 Installation Manual preview
CS9360
Brand: Oce Pages: 12
StarTech.com PM1115UW Setup Manual preview
PM1115UW
Brand: StarTech.com Pages: 13
Tandy TRP-100 Operation Manual preview
TRP-100
Brand: Tandy Pages: 83
IBM Model A00 Sales Manual preview
Model A00
Brand: IBM Pages: 16
Xerox 2045e Operating Instructions Manual preview
2045e
Brand: Xerox Pages: 78
Kyocera DU-61 Service Manual preview
DU-61
Brand: Kyocera Pages: 44
Xerox DocuPrint 4635 IPS Series Code List preview
DocuPrint 4635 IPS Series
Brand: Xerox Pages: 16
Epson All in One Printer User Manual preview
All in One Printer
Brand: Epson Pages: 210
Epson aculaser cx37 series User Manual preview
aculaser cx37 series
Brand: Epson Pages: 261
Epson AL-MX200 Series User Manual preview
AL-MX200 Series
Brand: Epson Pages: 410
Epson AcuLaser CX29DNF User Manual preview
AcuLaser CX29DNF
Brand: Epson Pages: 456
Epson AL-MX300 Series Quick Start Manual preview
AL-MX300 Series
Brand: Epson Pages: 2
Gestetner G056 Service Manual preview
G056
Brand: Gestetner Pages: 335
Brother Industries DCP-L2550DW Product Safety Manual preview
DCP-L2550DW
Brand: Brother Industries Pages: 22
Lanier 8025 Fax Manual preview
8025
Brand: Lanier Pages: 236

Brands by name

Popular brands

Load more brands