Lexmark M3150 Page 205 User Manual Download

Page: 205 / 256

Internal Solutions Port does not operate correctly

Action

Yes

Step 1

Make sure the Internal Solutions Port (ISP) is installed.

Install the ISP. For more information, see “Installing an Internal
Solutions Port” on page 16.

Print a menu settings page, and then check if the ISP is listed in the
Installed Options list.

Is the ISP listed in the Installed Options list?

Go to step 2.

Check if you have a
supported ISP.

Note:

An ISP from

another printer may
not work on this
printer.

Step 2

Check the cable and the ISP connection.

Use the correct cable, and then make sure it is securely connected to
the ISP.

Check if the ISP solution interface cable is securely connected into the
receptacle of the controller board.

Note:

The ISP solution interface cable and the receptacle on the

controller board are color

‑

coded.

Does the Internal Solutions Port operate correctly?

The problem is solved. Contact

customer

support

USB/parallel interface card does not operate correctly

Action

Yes

Step 1

Make sure the USB or parallel interface card is installed.

Install the USB or parallel interface card. For more information, see
“Installing an Internal Solutions Port” on page 16.

Print a menu settings page, and then check if the USB or parallel
interface card is listed in the Installed Options list.

Is the USB or parallel interface card listed in the Installed Options list?

Go to step 2.

Check if you have a
supported USB or
parallel interface card.

Note:

A USB or parallel

interface card from
another printer may
not work on this
printer.

Step 2

Check if you are using the correct cable and if it is connected securely to
the USB or parallel interface card.

Is the correct cable securely connected to the USB or parallel interface
card?

Contact

customer

support

Connect the cable to
the USB or parallel
interface card
connector.

Troubleshooting

205

Summary of Contents for M3150

































































































































































































































































Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands

Lexmark M3150, User Manual

Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands