manualshive.com logo in svg

Lexmark M3150, User Manual

The Lexmark M3150 is a high-performance multifunction printer designed for efficiency and productivity. Its robust specifications include fast print speeds, versatile paper handling, and exceptional image quality. Unlock the full potential of this device by downloading the free user manual from manualshive.com, offering comprehensive instructions to optimize your printing experience.

Share
Download
background image

Use

To

USB Buffer

Disabled
Auto
3K to [maximum size allowed]

Set the size of the USB input buffer.

Notes:

•

Auto is the factory default setting.

•

Disabled turns off job buffering. Any jobs already buffered on the printer hard
disk are printed before normal processing resumes.

•

The USB buffer size value can be changed in 1-K increments.

•

The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.

•

To increase the maximum size range for the USB Buffer, disable or reduce the
size of the parallel, serial, and network buffers.

•

The printer automatically restarts when the setting is changed from the printer
control panel. The menu selection is then updated.

Job Buffering

Off
On
Auto

Temporarily store print jobs in the printer hard disk before printing.

Notes:

•

Off is the factory default setting.

•

On buffers jobs on the printer hard disk.

•

Auto buffers print jobs only if the printer is busy processing data from another
input port.

•

Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is then updated.

Mac Binary PS

On
Off
Auto

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

•

Auto is the factory default setting.

•

On processes raw binary PostScript print jobs.

•

Off filters print jobs using the standard protocol.

ENA Address

yyy.yyy.yyy.yyy

Set the network address information for an external print server.

Note: 

This menu is available only when the printer is attached to an external print

server through the USB port.

ENA Netmask

yyy.yyy.yyy.yyy

Set the netmask information for an external print server.

Note: 

This menu is available only when the printer is attached to an external print

server through the USB port.

ENA Gateway

yyy.yyy.yyy.yyy

Set the gateway information for an external print server.

Note: 

This menu is available only when the printer is attached to an external print

server through the USB port.

Parallel [x] menu

Note: 

This menu appears only when an optional parallel card is installed.

Understanding the printer menus

136

Summary of Contents for M3150

































































































































































































































































Reviews:

No comments

Related manuals for M3150

Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon FAXPHONE L80 Setup Instructions preview
FAXPHONE L80
Brand: Canon Pages: 8
Canon ImageCLASS 2300 Network Manual preview
ImageCLASS 2300
Brand: Canon Pages: 102
Canon CX-G2400 Basic Operation Manual preview
CX-G2400
Brand: Canon Pages: 58
Canon image Prograf iPF680 Series Basic Manual preview
image Prograf iPF680 Series
Brand: Canon Pages: 132
Canon i470D Series Printing Manual preview
i470D Series
Brand: Canon Pages: 44
Canon imageClass LBP6230dw Getting Started preview
imageClass LBP6230dw
Brand: Canon Pages: 16
Canon i960 Series Printing Manual preview
i960 Series
Brand: Canon Pages: 2
Canon imageprograf IPF785 Service Manual preview
imageprograf IPF785
Brand: Canon Pages: 42
Canon CX 320 User Manual preview
CX 320
Brand: Canon Pages: 148
Canon Color Bubble Jet BJC-8200 Quick Start Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 6
Canon Color Bubble Jet BJC-1000 Series Specification preview
Color Bubble Jet BJC-1000 Series
Brand: Canon Pages: 2
Canon BJC-S530D Start Here preview
BJC-S530D
Brand: Canon Pages: 2
Canon BJC-S520 Setup Instructions preview
BJC-S520
Brand: Canon Pages: 2
Canon Color Bubble Jet BJC-8200 Service Manual preview
Color Bubble Jet BJC-8200
Brand: Canon Pages: 105
Canon i9900 Series Start Here preview
i9900 Series
Brand: Canon Pages: 2
Canon i900D Series Quick Start Manual preview
i900D Series
Brand: Canon Pages: 68
Canon i900D Series Printing Manual preview
i900D Series
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands