Lexmark M3150 Page 170 User Manual Download

Page: 170 / 256

Ordering a toner cartridge

Notes:

•

The estimated cartridge yield is based on approximately 5% coverage per page.

•

Extremely low print coverage for extended periods of time may negatively affect actual yield.

Lexmark Return Program toner cartridge

Part name

Part number

Extra High Yield Toner Cartridge

24B6035

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of
toner from toner cartridge.

For more information on replacing the imaging unit, see the instruction sheet that came with the supply.

Lexmark Return Program imaging unit

Part name

Part number

Imaging unit

24B6040

Ordering a maintenance kit

Notes:

•

Using certain types of paper may require more frequent replacement of the maintenance kit.

•

The separator roller, fuser, pick roller assembly, transfer roller, and redrive assembly are all included in the
maintenance kit and can be individually ordered and replaced if necessary.

•

Contact your service representative to replace the maintenance kit.

Recommended maintenance kits and part numbers

Printer model

Part number

M1145dn (100v)

40X8439

M3150de (100v)

40X8441

M1145dn (110v)

40X8281

M3150de (110v)

40X8434

M1145dn (220v)

40X8282

M3150de (220v)

40X8436

This kit is available only in Japan.

Maintaining the printer

170

Summary of Contents for M3150

































































































































































































































































Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands

Lexmark M3150, User Manual

Search results

Summary of Contents for M3150

Reviews:

Related manuals for M3150

Brands by name

Popular brands