Lexmark M1242 User Manual Download Page 12

Page: 12 / 140

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the USB cable, any

wireless network adapter, or the printer in the areas shown while actively printing.

Use the

USB printer port

Connect the printer to a computer.

Power cord socket Connect the printer to an electrical outlet.

Ethernet port

Connect the printer to a network.

Using the control panel

Use the

Display

View printing options, printer status, and error messages.

Menus button

Open the menus.

Learning about the printer

Summary of Contents for M1242













































































































































Search results

Summary of Contents for M1242

Reviews:

Related manuals for M1242

Brands by name

Popular brands

Lexmark M1242, User Manual

Search results

Summary of Contents for M1242

Reviews:

Related manuals for M1242

Brands by name

Popular brands