Lexmark CX725 Series User Manual Download Page 88

Page: 88 / 157

Clearing jams

Avoiding jams

Load paper properly

•

Make sure that the paper lies ﬂat in the tray.

Correct loading of paper Incorrect loading of paper

•

Do not load or remove a tray while the printer is printing.

•

Do not load too much paper. Make sure that the stack height is below the maximum paper ﬁll indicator.

•

Do not slide paper into the tray. Load paper as shown in the illustration.

•

Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or
envelopes.

•

Push the tray ﬁrmly into the printer after loading paper.

Use recommended paper

•

Use only recommended paper or specialty media.

•

Do not load paper that is wrinkled, creased, damp, bent, or curled.

Clearing jams

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands