Lexmark CX725 Series User Manual Download Page 128

Page: 128 / 157

Can receive but not send faxes

Action

Yes

Step 1

Load the original document properly into the ADF tray or on the
scanner glass.

Can you send faxes?

The problem is
solved.

Go to step 2.

Step 2

Set up the shortcut number properly.

•

Check if the shortcut number is set for the telephone number
that you want to dial.

•

Dial the telephone number manually.

Can you send faxes?

The problem is
solved.

Contact

customer

support

Can send but not receive faxes

Action

Yes

Step 1

Make sure that the tray or multipurpose feeder is not empty.

Can you receive faxes?

The problem is
solved.

Go to step 2.

Step 2

Check the ring count delay settings.

From the home screen, touch

Settings

Fax

Analog Fax

Setup

Fax Receive Settings

Rings to Answer

If necessary, conﬁgure the setting.

Can you receive faxes?

The problem is
solved.

Go to step 3.

Step 3

Replace the toner cartridge.

For more information, see the instruction sheet that came with the
supply.

Can you receive faxes?

The problem is
solved.

Contact

customer

support

Troubleshooting

128

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands