Lexmark CX725 Series User Manual Download Page 89

Page: 89 / 157

•

Flex, fan, and align the paper edges before loading.

•

Do not use paper that has been cut or trimmed by hand.

•

Do not mix paper sizes, weights, or types in the same tray.

•

Make sure that the paper size and type are set correctly on the computer or printer control panel.

•

Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:

•

When Jam Assist is set to On, the printer ﬂushes blank pages or pages with partial prints after a jammed
page has been cleared. Check your printed output for blank pages.

•

When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Jam locations

Standard bin

Automatic document feeder (ADF)

Fuser

Trays

Duplex unit

Multipurpose feeder

Clearing jams

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands