Lexmark CX725 Series User Manual Download Page 40

Page: 40 / 157

To connect a telephone to the printer, remove any installed adapter plug from the telephone port of the
printer, and then connect the telephone.

Setting up fax using VoIP telephone service

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not use the fax feature during a

lightning storm.

Connect one end of the telephone cable to the line port of the printer.

Connect the other end of the cable to the port labeled

Phone Line 1

Phone Port

on the VoIP adapter.

Note:

The port labeled

Phone Line 2

Fax Port

is not always active. VoIP providers may charge extra

cost for the activation of the second phone port.

Connect the telephone to the telephone port of the printer.

Faxing

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands