Lexmark CX725 Series User Manual Download Page 35

Page: 35 / 157

Setting up fax using a standard telephone line

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not use the fax feature during a

lightning storm.

Setup 1: Printer is connected to a dedicated fax line

Connect one end of the telephone cable to the line port of the printer.

Connect the other end of the telephone cable to an active analog wall jack.

Notes:

•

You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).

•

If you want to receive faxes automatically, then set the printer to pick up on any number of rings that you
want.

Faxing

Summary of Contents for CX725 Series






























































































































































Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands

Lexmark CX725 Series, User Manual

Search results

Summary of Contents for CX725 Series

Reviews:

Related manuals for CX725 Series

Brands by name

Popular brands