Menu item
Description
Network Mode
Ad hoc
Infrastructure
Specifies the network mode
Notes:
•
Ad hoc is the factory default setting. This configures wireless
connection directly between the printer and a computer.
•
Infrastructure lets the printer access a network using an access point.
Compatibility
802.11b/g/n
802.11n
802.11b/g
Specifies the wireless standard for the wireless network
Note:
The 802.11b/g/n is the factory default setting.
Choose Network
[list of available networks]
Lets you select an available network for the printer to use
View Signal Quality
Lets you view the quality of the wireless connection
View Security Mode
Lets you view the encryption method that a wireless network uses
Note:
Wi-Fi Protected Setup (WPS)
is a simple and secure configuration that allows you to establish a wireless network
and enable network security without requiring prior knowledge of Wi-Fi technology. It is no longer necessary to
configure the network name (SSID) and WEP key or WPA passphrase for network devices.
AppleTalk menu
This menu is available from the Network/Ports menu:
Network/Ports
>
Standard Network
or
Network [x]
>
Standard Network Setup
or
Network [x] Setup
>
AppleTalk
Menu item
Description
Activate
Yes
No
Activates AppleTalk support
Note:
Yes is the factory default setting.
View Name
Shows the assigned AppleTalk name
Note:
The name can be changed only from the Embedded Web Server.
View Address
Shows the assigned AppleTalk address
Note:
The address can be changed only from the Embedded Web Server.
Set Zone
[default]
[list of zones available on the
network]
Provides a list of AppleTalk zones available on the network
Note:
When “default” is selected, the printer uses the AppleTalk zone that the
router identifies as the default zone for the network. If no default zone exists,
then the zone marked with an * is the default setting.
Understanding printer menus
109
