Lexmark 7016-630 Page 61 Service Manual Download

Page: 61 / 455

Insert the tray.

From the printer control panel, touch

Done

to clear the message and continue printing.

23y.xx paper jam messages

Error code

Description

Action

230.01

Sheet covering internal duplex sensor during warm
up.

Go to

“Duplex service check” on page 62

230.02

Paper jam around internal duplex.

230.03

Internal duplex sensor never made by leading edge of
page.

230.04

Page in duplexer ahead of current reversing page
never staged.

230.05

Internal duplex sensor never broke on the trailing
edge of the sheet.

230.07

Internal duplex sensor never broke from sheet ahead
of page.

230.09

Page in duplexer never picked.

230.10

Narrow page reversing into duplexer.

230.28

Bouncy duplex sensor never made.

232.03

Input sensor never detected sheet from internal
duplex path.

232.10

Feed error picking from the duplexer.

7016

Diagnostic information

Summary of Contents for 7016-630








































































































































































































































































































































































































































































Search results

Summary of Contents for 7016-630

Reviews:

Related manuals for 7016-630

Brands by name

Popular brands

Lexmark 7016-630, Service Manual

Search results

Summary of Contents for 7016-630

Reviews:

Related manuals for 7016-630

Brands by name

Popular brands