Lexmark 7016-630, Service Manual

Page: 438 / 455

Load Manual Feeder with [custom type name] [paper
orientation] 95
Load Manual Feeder with [paper size] [paper
orientation] 95
Load manual feeder with [paper type] [paper size]
[paper orientation] 95
Maintenance kit low [80.xy] 96
Maintenance kit nearly low [80.xy] 96
Maintenance kit very low, [x] estimated pages remain
[80.xy] 96
Memory full [38] 96
Memory full, cannot print faxes 96
Memory full, cannot send faxes 96
Network [x] software error [54] 96
No analog phone line connected to modem, fax is
disabled. 97
Non
‑
Lexmark [supply type], see User’s Guide
[33.xy] 97
Not enough free space in flash memory for resources
[52] 97
Paper changes needed 97
Parallel port [x] disabled [56] 98
Printer had to restart. Last job may be incomplete. 98
Reinstall missing or unresponsive cartridge [31.xy] 99
Reinstall missing or unresponsive imaging unit
[31.xy] 99
Remove defective disk [61] 98
Remove paper from standard output bin 98
Replace all originals if restarting job. 99
Replace cartridge, 0 estimated pages remain
[88.xy] 98
Replace defective imaging unit [31.xy] 98
Replace imaging unit, 0 estimated pages remain
[84.xy] 98
Replace maintenance kit, 0 estimated pages remain
[80.xy] 98
Replace unsupported cartridge [32.xy] 99
Replace unsupported imaging unit [32.xy] 99
Restore held jobs? 100
Scanner automatic feeder cover open 100
Scanner disabled by admin [840.01] 100
Scanner disabled. Contact system administrator if
problem persists. [840.02] 100
Scanner jam, remove all originals from the scanner
[2yy.xx] 100
Scanner jam, remove jammed originals from the
scanner [2yy.xx] 100
Serial port [x] disabled [56] 100
SMTP server not set up. Contact system
administrator. 100
Some held jobs were not restored 101
Standard network software error [54] 101
Standard USB port disabled [56] 101
Supply needed to complete job 101
Too many flash options installed [58] 101
Too many trays attached [58] 101
Unformatted flash detected [53] 102
Unsupported disk 102
Unsupported option in slot [x] [55] 102
Unsupported USB hub, please remove 92
USB port [x] disabled [56] 102
Weblink server not set up. Contact system
administrator. 102
printer setup
defaults 176
edge to edge 177
permanent page count 177
printed page count 177
printhead adjustment 310
R
recovery mode
accessing 198
recycled paper
using 27
registration 166
Reinstall missing or unresponsive cartridge [31.xy] 99
Reinstall missing or unresponsive imaging unit
[31.xy]
99
removal procedures
tips 221
removals
ACM assembly 290
ACM assembly, option tray 330
adf cable 321
adf input tray 315
ADF left hinge 324
ADF separator roll 312
ADF top cover assembly 320
adf unit 316
bail 272
bin full sensor 307
bin full sensor cable 309
cartridge gearbox 231
cartridge plunger 251
cave light lens 263
control panel assembly 256
control panel cover 265
control panel ribbon cable 325
controller board 239
controller board shield 241
cooling fan 238
display 266
diverter cover 306
7016
Index
438