Lexmark 7016-630 Page 54 Service Manual Download

Page: 54 / 455

Sensor (input) early/late arriving service check

Action

Yes

Step 1

Check the paper source.

Is the paper from the MPF?

Go to step 2.

Go to step 5.

Step 2

Check the MPF pick roller and separator pad for damage and
contamination.

Are they free of damage and contamination?

Go to step 3.

Replace the MPF pick
roller and separator
pad. See

“MPF pick

roller removal” on
page 271

and

“Separator pad
removal” on page
278

Step 3

Check the MPF solenoid for proper operation:

Remove the left cover.

POR into the Diagnostics menu and perform a feed test:

Diagnostics Menu

Input Tray Tests

Feed Test

Multipurpose feeder

Check if the MPF solenoid moves when doing the feed test.

Does it move when doing the feed test?

Go to step 4.

Replace the MPF
solenoid. See

“MPF

solenoid removal” on
page 225

Step 4

Make sure the MPF gearbox spring is properly installed and free of
damage. Check the MPF gearbox for wear or damage.

Are they free of wear or damage?

Go to step 5.

Replace the MPF
gearbox. See

“MPF

gearbox removal” on
page 227

Step 5

Check the input sensor area for jammed media fragments.

Is the paper path free of partially fed or jammed media?

Go to step 6.

Clear the paper path of
any media fragments.

Step 6

Check the jam access cover if it is blocking the input sensor.

Is it blocking the input sensor?

Replace the jam access
cover. See

“Jam access

cover removal” on
page 273

Go to step 7.

Step 7

Check the input sensor cable for proper connection.

Is it properly connected?

Go to step 8.

Reseat the cable.

7016

Diagnostic information

Summary of Contents for 7016-630








































































































































































































































































































































































































































































Search results

Summary of Contents for 7016-630

Reviews:

Related manuals for 7016-630

Brands by name

Popular brands

Lexmark 7016-630, Service Manual

Search results

Summary of Contents for 7016-630

Reviews:

Related manuals for 7016-630

Brands by name

Popular brands