The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning to a network computer
1
Load the original document.
2
From the home screen, touch
Scan
>
Computer
.
3
Touch the name of the destination computer.
Notes:
•
Make sure the scan software is installed on the destination computer.
•
Make sure the printer can communicate with the destination computer.
•
You may be prompted to enter a PIN if the computer requires it.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4
Select the output file type you want to create and other scan options. If necessary, touch
Accept
each time you
make a selection.
5
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning a two
‑
sided document using the ADF
Depending on your printer model, the ADF can scan duplex (two-sided) pages in a single pass.
1
Load an original document faceup into the ADF.
2
Adjust the paper guides.
3
From the home screen, touch
Scan
.
4
Follow the instructions on the display, and then set the other scan options. If necessary, touch
Accept
each time
you make a selection.
Note:
From the Sides menu in Scan Options, make sure you select
2
‑
Sided
, and then touch
Accept
.
5
Press
.
6
Follow the instructions on the display.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write
‑
protected.
1
Load the original document.
2
From the home screen, touch
Scan
>
Memory Device
.
Scanning
62
