84
Lexmark E230, E232, E234(n), E330, and E332n
Lexmark E230, E232, E234(n), E330,
and E332n
Limit label printing to occasional use of paper office labels designed for
laser printers. We do not recommend using vinyl or polyester labels.
The Lexmark E230, E232, E234(n), E330, and E332 support stocks up to
43 lb (163 g/m
2
). The automatic paper feeder can hold up to 50 sheets of
paper labels.
The following table lists the maximum basis weights supported by Tray 1
and the manual sheet feeder. More detailed specifications appear on the
following page.
For paper and transparency specifications, see the
Lexmark E230/E232/E234(n)/E330/E332n Publications
CDs.
Maintenance procedures
If the print quality begins to degrade when printing sheets of labels, we suggest you follow the three cleaning steps below:
1
Print 5 sheets of paper.
2
Wait approximately 5 seconds.
3
Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print cartridge, more often
with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and
fuser problems.
Lexmark E230, E232, E234(n), E330, E332n: Overview of card stock and label support
Paper source
Card stock
Labels
Index Bristol
Tag
Cover
Paper
Vinyl
Tray 1
–
–
–
163 g/m
2
–
Manual feed
163 g/m
2
163 g/m
2
–
163 g/m
2
–
Media specifications
Labels
Width:
210 to 216 mm (8.3 to 8.5 in.)
Length:
279 to 297 mm (11 to 11.7 in.)
Weight:
Up to 163 g/m
2
(43 lb)
Thickness:
Up to 0.25 mm (0.01 in.)
Smoothness:
100 to 400* Sheffield
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock
Weight:
Up to 163 g/m
2
Index Bristol (90 lb)
Up to 163 g/m
2
Tag (100 lb)
Note:
To minimize curl, use the rear exit when printing on card stock and labels.
