Lexmark 22L0176 - C 770dn Color Laser Printer Manual Download Page 117

Page: 117 / 146

117

Optra K 1220

Limit label printing to occasional use of paper office labels designed for
laser printers. We do not recommend using vinyl or polyester labels

card

stock with the Optra K 1220 printer.

Always

feed labels from the manual feed tray or the optional multipurpose

feeder. The multipurpose feeder can hold up to 30 sheets of labels.

The following table lists the maximum basis weights supported by each of
the printer trays.

For paper and transparency specifications, see the printer

User’s Guide

When printing on labels:

•

From the operator panel or from MarkVision, set the Paper Type to Labels. Set the Paper Weight to either Normal
or Heavy for optimum print quality.

•

To minimize curl, make sure the rear exit bin is open so the labels feed straight out the back of the printer.

•

Do not print a large number of labels continuously.

•

Do not use labels that have exposed adhesive on the label sheets.

Optra K 1220: Overview of card stock and label support

Paper source

Card stock

Labels

Index Bristol

Tag

Cover

Paper

Vinyl

Multipurpose feeder

–

150 g/m

–

Manual feed tray

–

150 g/m

–

Media specifications

Labels

Width:

210 to 216 mm (8.3 to 8.5 in.)

Length:

279 to 356 mm (11 to 14 in.)

Weight:

120 to 150 g/m

(32 to 40 lb)

Summary of Contents for 22L0176 - C 770dn Color Laser Printer



















































































































































Search results

Summary of Contents for 22L0176 - C 770dn Color Laser Printer

Reviews:

Related manuals for 22L0176 - C 770dn Color Laser Printer

Brands by name

Popular brands

Lexmark 22L0176 - C 770dn Color Laser Printer, Manual

Search results

Summary of Contents for 22L0176 - C 770dn Color Laser Printer

Reviews:

Related manuals for 22L0176 - C 770dn Color Laser Printer

Brands by name

Popular brands