Lexmark 22L0176 - C 770dn Color Laser Printer Manual Download Page 107

Page: 107 / 146

107

Lexmark W820

Limit label printing to occasional use of A4 or letter size paper office labels
designed for laser printers. We do not recommend using vinyl or polyester
labels.

The Lexmark W820 supports stocks up to 163 g/m

Always

feed labels and

card stock from trays 1, 2, or 3 each of which can hold up to 250 sheets of
labels or card stock.

The following table lists the maximum basis weights supported by the trays
and the multipurpose feeder.

For paper and transparency specifications, see the printer publications CD.

Lexmark W820: Overview of card stock and label support

Trays 1

Trays 2, 3

Trays 4, 5

Multipurpose Feeder

Media types

Paper, Bond,
Card stock, Labels,
Transparencies

Paper, Bond,
Card stock, Labels

Paper, Bond

Paper, Bond,
Card stock, Labels,
Transparencies,
Envelopes

Weight

60—163 g/m

60—105 g/m

120 to 128 g/m

Media specifications

Labels

Width:

210 to 216 mm (8.3 to 8.5 in.)

Length:

279 to 356 mm (11 to 11.7 in.)

Weight:

120 to 128 g/m

Thickness:

0.13 to 0.20 mm (0.005 to 0.008 in.)

Smoothness:

100 to 400 Sheffield*

* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.

Card stock

Width:

210 to 216 mm (8.3 to 8.5 in.)

Length:

279 to 356 mm (11 to 11.7 in.)

Weight:

Up to 163 g/m

Summary of Contents for 22L0176 - C 770dn Color Laser Printer



















































































































































Search results

Summary of Contents for 22L0176 - C 770dn Color Laser Printer

Reviews:

Related manuals for 22L0176 - C 770dn Color Laser Printer

Brands by name

Popular brands

Lexmark 22L0176 - C 770dn Color Laser Printer, Manual

Search results

Summary of Contents for 22L0176 - C 770dn Color Laser Printer

Reviews:

Related manuals for 22L0176 - C 770dn Color Laser Printer

Brands by name

Popular brands