103
Lexmark T630, T632, T634
Pick roller technology
Like the Optra S and Optra T, the Lexmark T52x, T62x, and T63x family of printers use an auto compensator to pick the
media rather than the corner buckler system used by earlier printer models.
The Lexmark T630, T632 and T634 trays have two rollers that touch the media in two places (see
Figure 17 on page 103
).
Avoid placing deep perforations in these areas since the media may nest, causing multiple sheet feeds. Perforations that
could cause nesting and tenting should fall outside the 0.3—0.79 in. area on the leading edge of the media. (This is different
from the 0.50 in. we recommend leaving at the top of the form for printers with a corner buckler system.) You may want to
use micro-perfs to avoid nesting problems. See Perforations and die-cuts on page 8 for more information.
Figure 17.
Location of pick rollers
Pick roller location
0.79 in.
0.31 in.
4.84 in.
5.43 in.
1.34 in.
1.93 in.
Direction of feed
