76
Lexmark C752
Standard trays and special media trays
The Lexmark C752 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark
C752 trays, which hold approximately 500 sheets of 75 g/m
2
bond paper, reliably feed all supported media.
Pick roller technology
The Lexmark C752 uses an auto compensator to pick the media rather than the corner buckler system used by earlier
printer models.
The Lexmark C752 trays have two rollers that touch the media in two places (see
Figure 14 on page 76
). Avoid placing
deep perforations in these areas since the media may nest, causing multiple sheet feeds. Perforations that could cause
nesting and tenting should fall outside the 0.31—1.05 in. area on the leading edge of the media. (This is different from the
0.50 in. we recommend leaving at the top of the form for printers with a corner buckler system.) You may want to use micro-
perfs to avoid nesting problems. See Perforations and die-cuts on page 8 for more information.
Figure 14.
Location of pick rollers
Media specifications
Labels
Thickness:
0.102 to 0.305 mm (0.004 to 0.012 in.)
Smoothness:
100 to 400* Sheffield
* 150—250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Pick roller location
1.05 in.
0.31 in.
4.84 in.
5.43 in.
1.34 in.
1.93 in.
Direction of feed
