manualshive.com logo in svg

LevelOne VOI-9200, User Manual

The LevelOne VOI-9200 User Manual is a comprehensive guide for setting up and using the product. You can download the manual for free from manualshive.com, providing detailed instructions on how to maximize the features of the device. Get your copy today and enhance your user experience.

Share
Download
background image

 

 

2. 

Web Based Management 

This chapter illustrates how to login and configure system parameters with VOI-9200. 
The factory default of LAN IP address is 192.168.1.1 and WAN IP address is 
192.168.0.1.    You can connect your PC or laptop to access the web GUI through 
LAN port at 

https://192.168.1.1/

, or through WAN port at 

https://192.168.0.1

. 

 

 

 
 
 
Once connected, the browser may warn 
about accepting a certificate, please accept 
it.  
 
 
 
 
 
 
 
 
 
 
 
Then, enter the username and password 
(default is 

admin

/

admin

) to login for PBX 

configuration.  The PBX System with PBX 
status will be shown.   
 
 
Note the password could be changed in the 
User Management page under user ID 
“admin”. 
 
 
 

Summary of Contents for VOI-9200










































































Reviews:

No comments

Related manuals for VOI-9200

Brands by name

Popular brands

Load more brands