manualshive.com logo in svg

LevelOne VOI-9200, User Manual

The LevelOne VOI-9200 User Manual is a comprehensive guide for setting up and using the product. You can download the manual for free from manualshive.com, providing detailed instructions on how to maximize the features of the device. Get your copy today and enhance your user experience.

Share
Download
background image

 

 

2.6.2.  FXO PSTN Trunk (PC#1, PC#2 only) 

A PSTN trunk group is a logical group of one or more PSTN subscriber lines 
connecting to FXO ports on VOI-9200 IP PBX. 
 
The PSTN Trunk Management page allows the administrator to configure PSTN 
trunks. By selecting Trunk -> FXO PSTN Trunk, one can add, edit, and delete PSTN 
trunks. IP PBX service must be reloaded to activate changes. 

 

Add PSTN Trunk 

Click <Add new> button from the left panel. 
Enter settings shown in Table 2-6-2 
Click APPLY button. 
The newly added PSTN trunk shall be displayed in Trunks panel on the left side. 

 

 

Edit PSTN Trunk 

Click the link of trunk to edit from the Trunks panel. 
Edit settings shown on the right side. 
Click Save button. 

Summary of Contents for VOI-9200










































































Reviews:

No comments

Related manuals for VOI-9200

bintec elmeg elmeg hybird 300 Installation Manual preview
elmeg hybird 300
Brand: bintec elmeg Pages: 53
Panasonic KX-TEA308 Features Manual preview
KX-TEA308
Brand: Panasonic Pages: 278
Samsung OfficeServ 7100 Series System Description preview
OfficeServ 7100 Series
Brand: Samsung Pages: 113

Brands by name

Popular brands

Load more brands