2.3. User Management
This chapter describes the procedures to configure IP telephony part for the IP PBX.
Usually, it is required to reload configuration in order to make new configuration
effective. Before reloading IP PBX, you need to configure in sequence the user group,
user, device, route, route group, and trunk pages as follows.
2.3.1. Usergroup
A usergroup is a logical grouping of users and their privileges. For instance, one
could belong to multiple usergroups in an IP telephony network, such as Sales,
Marketing, Administration, Accounting, and Engineering, etc. Each usergroup
associates with a set of PBX features and call routing scopes. In other words, users in
the same usergroup share the same usage privilege of PBX features and final
destinations.
The Usergroup Management page allows the administrator to manage usergroups.
By selecting User
→
Usergroup, one can add, edit, or delete usergroups. Note that you
have to reload to activate changes.
1. Add Usergroup
Click <ADD> icon from the panel
Enter settings shown in Table 2-1.
Click APPLY icon.
Now, you should be able to see the newly added usergroup displayed in the
Groups panel.
