Page 79
Data
– System Status
WAN Interface
Connection Type
– The type of connection used – DHCP, Fixed IP, PPPoE
or PPTP.
Connection Status
– Either "Connected" or "Disconnected”.
"Force Renew"
button
– Only available if using a dynamic IP address
(DHCP). Clicking this button will perform a DHCP "Renew" transaction with
the ISP's DHCP server. This will extend the period for which the current
WAN IP address is allocated to you.
Connect/Disconnect
– Used for dial-up/connection of PPPoE or PPTP.
IP Address
– The IP address of the Multi-WAN VPN Router, as seen from
the Internet. This IP Address is allocated by the ISP (Internet Service
Provider).
Subnet Mask
– The Network Mask (Subnet Mask) for the IP Address above.
Domain Name IP Address
– The address of the current DNS (Domain
Name Server)
Gateway
– The address of the Multi-WAN VPN Router gateway.
MAC Address
– The MAC (physical) address of the Multi-WAN VPN
Router, as seen from the Internet.
LAN Interface
IP Address
– The LAN IP Address of the Multi-WAN VPN Router.
Subnet Mask
– The Network Mask (Subnet Mask) for the IP Address above.
MAC Address
– The MAC (physical) address of the Multi-WAN VPN
Router, as seen from the local LAN.
DHCP Server
– The status of the DHCP Server function - either "Enabled"
or "Disabled".
Device
Information
Hardware ID
– The manufacturers ID for this particular device.
Firmware Version
– Version of the Firmware currently installed.
NAT
– Status of the
NAT
feature
– either “Enable” or “Disable”.
Load Balance
– Status of the
Load Balance
feature
– either “Enable” or
“Disable”.
Virtual Server
– Status of the
Virtual Server
feature
– either "Enabled" or
"Disabled".
Special Applications
– Status of the
Special Applications
feature
– either
"Enabled" or "Disabled".
Multi DMZ
– Status of the Multi
DMZ
feature
– either "Enabled" or
"Disabled".
Block URL
– Status of the
Block URL
feature
– either “Enable” or “Disable”.