Page 63
Mesh Group Setup
The Multi-WAN VPN Link Balancer not only provides VPN failover and backup but is also capable
of offering VPN load balance.
If you have setup IPSec policy on
the “IPSec Policy Setup” web page, then you don‟t have to enter
IPSec policy setup again here. You can press
the “
Scan Policies
” button to copy the IPSec Policy
into the Mesh Group Setup web page. You also can configure your IPSec Policy on the Mesh Group
web page by pressing t
he “
Create
” button. To use the VPN load balance option, it is necessary to use
a static IP.
For configuring Mesh Group Setup you can refer to the IPSec Policy Setup:
Figure 6-4: Mesh Group Setup
Once you have added your VPN Policy to the Mesh Group, you can set up your Mesh Group through
the VPN Mesh Group Configuration.
