Page 68
Setup Bandwidth Control QoS Example
The following is teaching you how to setup bandwidth control QoS.
( A)
Figure 7-3: Policy Configuration
*
51200 k bit/Sec is the maximum bandwidth that device CPU can handle.
1.
First, you have to “Enable” QoS, once you have enabled it. It will start QoS mechanisms.
2. From now on, you can dispatch the network bandwidth (inbound /outbound) to the WAN ports.
By default, the device dispatches each WAN port for inbound & outbound is 6400 kbit/sec
(51200/8)=6400 kbit/Sec. However, your local ISP provides the real bandwidth for each WAN
bandwidth. Therefore, you fill-out the inbound & outbound bandwidth that your local ISP offer to you.
3. Once you fill-out each WAN port bandwidth, then you can move to the next step, setting up each
WAN port inbound/outbound bandwidth policy.
