Page 71
Admin. Setup
Remote Access Configuration
– This feature allows you to manage the Multi-WAN VPN Router via
the Internet. You can restrict access to a specified IP address or address range.
Administrator Password
– This feature allows you to assign a password for remote upgrade and
access to the Multi-WAN VPN Router.
Figure 8-1: Admin. Setup
Settings
– Admin. Setup
Remote Access
Configuration
Remote Upgrade
– If enabled, you can use the supplied Windows
utility to remotely upgrade the firmware. If not enabled, the upgrade
must be performed by a PC on the LAN.
Remote Setup
– If enabled, access to the web-based interface is
available via the Internet (See below for details). If not enabled, access
is only available by a PC on the LAN.
Access port
– The port number used when connecting remotely. The
default port number is 8080.
Allowed Remote IP
– Remote access is only available to the IP
address entered here.
1. Leaving these fields blank (0.0.0.0 ~ 0.0.0.0), will allow access by
all PCs.
2. These addresses must be Internet IP addresses; not addresses on
the local LAN.
3. To specify a single address, enter it in both fields.
Administrator
Password
You can modify the device password in this field. The default entry is
“ “ (no password).
