Page 40
Multi DMZ
This feature allows each WAN port IP address to be associated with one (1) computer on your LAN.
All outgoing traffic from that PC will be associated with that WAN port IP address. Any traffic sent to
that IP address will be forwarded to the specified PC, allowing unrestricted 2-way communication
between the "DMZ PC" and other Internet users or Servers.
Note:
The "DMZ PC" is effectively outside the Firewall, making it more vulnerable to hacker attacks or other
intrusions. For this reason, you should only enable the DMZ feature when required.
Figure 4-8: Multi DMZ
Settings
– Multi DMZ
Multi DMZ Edit
Enable
– Use this to enable or disable the DMZ setting, as required.
WAN
– Select the desired WAN port binding with a particular LAN host.
(There are a maximum 4 WAN ports which can be available.) Its
connection type may change based on your WAN connection type
(Static/DHCP/PPPoE/PPTP).
Name
– Enter a name to assist you to remember this setting. This name
can be anything you choose and will have no effect on the operation.
Private IP Address (LAN)
– Enter the IP address of the PC you wish to
associate with this WAN port IP address. This IP address should be fixed,
or reserved. (See the
Host IP
section for details on reserving an IP
address.)
Access Group
–You can decide which users will have authorization to
use DMZ by defining the groups (Host IP web page)
Direction
–For DMZ, you can allow inbound only, outbound only, or both
inbound and outbound traffic.
Multi DMZ List
Multi DMZ List shows the details of all DMZ configuration data which are
currently defined. You can modify its configuration data by selecting and
clicking on a row.
