Network storage: Select to send the media to a Network storage when a trigger is activated.
■
Network storage location: Enter the path of the network storage.
■
Workgroup: Enter the workgroup for network storage.
■
User name: Enter the user name.
■
Password: Enter the password.
To verify if the network storage settings are correctly configured, click Test. The result will be
shown in a pop-up window. If it works, you will also receive a test.txt file on the network storage
server.
When completed, click Save to take effect and then click Close to quit this page
.
The new
server name will appear in the server drop-down list on the application page as below. To
remove a server setting from the list, select a server name from the drop-down list and then
click Delete
.
Note that only when the server setting is not being applied to an event setting can
it be deleted.
