deletedeny Remove a set of deny IP address range from server. If start and end
parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address from
given index position. [start, end] parameters have higher priority
than the [index] parameter.
start <ip
address>
The start IP address to add or to delete.
end <ip
address>
The end IP address to add or to delete.
index
<value>
The start position to add or to delete.
return <return
page>
Redirect to the page <return page> after the parameter is assigned.
The <return page> can be a full URL path or relative path according
to the current path. If you omit this parameter, it will redirect to an
empty page.
Get SDP of Streamings
Note:
This request requires viewer access privilege
Method:
GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please
refer to the “subgroup of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET method.
Open the network streamings
Note:
This request requires viewer access privilege
Syntax:
For http push server (mjpeg):
http://<servername>/<network_http_s<0~m-1>_accessname>
For rtsp (mp4), user needs to input the url below for a rtsp compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
For detailed streaming protocol, please refer to “control signaling” and “data format” documents.
Senddata
Note:
This request requires privilege of viewer
Method: GET/POST
