Commissioning and configuration
Leuze electronic GmbH + Co. KG
BCL 300
i
\ BCL 301
i
92
10.2 BCL 301
i
- multiNet plus Slave
10.2.1 Measures to be performed prior to the initial commissioning
Before commissioning, familiarize yourself with the operation and configuration of the BCL 301
i
.
Before connecting the supply voltage, recheck all connections and ensure that they have been properly
made.
The description of the electrical connections can be found in Chapter 7.
10.2.2 Starting the device
Via the address switch, activate the address assigned to the BCL 301
i
in Leuze multiNet
Connect the 18 … 30VDC supply voltage
The BCL 301
i
registers itself automatically in Leuze multiNet, then the LED NET lights up green. The
BCL 301
i
sends an ’S’ via the interface to the master as a start-up message and to inform that the device
is ready.
The BCL 301
i
works in the standard setting (multiNet mode, factory setting) as described below:
• Activation of the reading gate via SWIO_1, the scanning beam becomes visible
• If a bar code is detected, it is sent to the master via Leuze multiNet.
• If the BCL 301
i
is equipped with a display, the read bar code content appears on this display.
NOTE
The BCL 301
i
can decode the following code types in the standard setting:
• Code 128
Number of digits 4 … 63
• 2/5 Interleaved Number of digits 10
• Code 39
Number of digits 4 … 30
• EAN 8 / 13
Number of digits 8 and 13
• UPC
Number of digits 8
• Codabar
Number of digits 4 … 63
• Code 93
Number of digits 4 … 63
• Code GS1 Data Bar OMNIDIRECTIONAL
• Code GS1 Data Bar LIMITED
• Code GS1 Data Bar EXPANDED
Deviations from these settings must be set via the webConfig tool. See "Leuze webConfig tool"
NOTE
Permissible values for the network address in the Leuze multiNet plus are 1 … 31. Make certain
that a different address is assigned to each multiNet plus participant.
From the device address > 0 set, the BCL 301
i
detects that networking is required. It automati
-
cally switches to the Leuze multiNet plus network and waits for initialization by the master.
