Technical data
Leuze electronic GmbH + Co. KG
BCL 300
i
\ BCL 301
i
34
The BCL 300
i
\ BCL 301
i
bar code readers are designed in accordance with protection class III for supply
by PELV (protective extra-low voltage with reliable disconnection).
5.1.2 Oscillating-mirror scanner
Technical data same as for line scanner without heating, however with the following differences:
Environmental data
Operating temperature
range
0 °C … -40 °C
Storage temperature
range
-20°C … +70°C
Air humidity
Max. 90% rel. humidity, non-condensing
Vibration
IEC 60068-2-6, test Fc
Shock
IEC 60068-2-27, test Ea
Continuous shock
IEC 60068-2-29, test Eb
Electromagnetic compat
-
ibility
EN 55022;
IEC 61000-6-2 (contains IEC 61000-4-2, -3, -4, -5 and -6)
2)
1) Only with the MS 300/MS 301, MK 300/MK 301 or KB 301-3000 connection hood and screwed-on M12 connector or
cable lead-throughs and mounted caps. Minimum tightening torque of the housing connecting screw of the connection
hood is 1.4Nm!
2) This is a Class A product. In a domestic environment this product may cause radio interference, in which case the
operator may be required to take adequate measures.
ATTENTION!
For UL applications, use is only permitted in Class 2 circuits in accordance with the NEC
(National Electric Code).
Type
BCL 300
i
Stand-alone
BCL 301
i
multiNet plus slave
Design
Line scanner without heating
Table 5.1:
Specifications of the BCL 301
i
and BCL 300
i
line/raster scanners without heating
Type
BCL 300
i
Stand-alone
BCL 301
i
multiNet plus slave
Design
Oscillating-mirror scanner without heating
Optical data
Beam exit
Lateral zero position at an angle of 90°
Beam deflection
Via rotating polygon wheel (horizontal) and stepping motor with mirror (vertical)
Oscillation frequency
0 … 10 Hz
(adjustable, max. frequency is dependent on set swivel angle)
Max. swivel angle
±20° (adjustable)
Reading field height
See reading field curves
Electrical data
Power consumption
Max. 4W
Mechanical data
Weight
580 g (without connection hood)
Dimensions
(H x W x D)
58 x 125 x 110 mm (without connection hood)
Table 5.2:
Specifications of the BCL 301
i
and BCL 300
i
oscillating-mirror scanners without heating
