Operation
Leuze
electronic
26
VR 2300
Leuze electronic
8
Operation
8.1
Display Elements
An LED on the unit’s rear side indicates whether the read was successful (green) or not
(red).
In the VR 2300 there is an LED. It signals in the standard setting that the VR is ready for
operation.
8.2
Error Handling
Error, warning and status messages of the VR 2300 are transmitted via the host interface
only.
Types of errors
Errors are divided up into the following types:
• Warnings
• Serious errors
Warnings
Warnings indicate temporary operating faults which do not effect the proper functioning of
the device.
Serious errors
Serious errors impair the proper functioning of the device. The device must be reinitialised.
Troubleshooting
Isolated warnings can be ignored, since the VR 2300 will continue to function properly.
Following a serious error, you should reinitialise the VR. It will then usually again function
properly. If a hardware problem is present, the VR 2300 will not reinitialise.
Warnings and errors which occur frequently can be corrected easiest using the Vision-
READER software.
If you cannot correct faults and errors with the software, please contact a Leuze electronic
sales office or service facility. For addresses, please refer to the back page of this operating
manual.
