Reflectors
31
AMS 348
i
Leuze electronic
Notice!
The reflector must be angled. To do this, use the spacer sleeves. Angle the reflectors so that
the
surface reflections of the foil seal are deflected to the left, right or upwards
.
Avoid
a downward pitch,
as additional reflections may occur on the running rails. chapter 6.4.3
gives the correct pitch with respect to the reflector size and, thus, the length of the spacers.
Reflective tapes …-S and …-M
Figure 6.3:
Reflector mounting
Figure 6.4:
Pitch of the reflector
Pitch 1 °
Direct reflection from the
triad structure
Deflected surface reflection due to
the pitch of the reflective tape
Pitch 1 °
Spacer sleeves
