Leuze electronic AMS 200, Technical Description, Page: 28 / 118

Control panel display AMS 200…
24 AMS 200 Leuze electronic
6.2.2 Status displays
6.2.2.1 LED PWR
off device OFF
- no supply voltage
flashes green device ok, initialisation phase
- no measurement value output
- voltage connected
- self test running
- initialisation running
- parameter download running
- booting
green continuous light device ok
- measurement value output
- self test successfully finished
- device monitoring active
flashes red device ok, warning set
- measurement value output
- light beam interruption detected
- plausibility error detected
red continuous light device error
- no measurement value output
- for details see status displays on the display
6.2.2.2 BUS LED (for PROFIBUS only; no function for Interbus)
off no supply voltage
- PROFIBUS deactivated (SSI interface only)
green continuous light bus ok
- device active on PROFIBUS ("data exchange")
flashes red bus error
- configuration failed ("parameter failure")
- DP error
- no data exchange
red continuous light bus error
- no DP protocol established to the master ("no data
exchange")