Lenovo ThinkSystem SR665 Setup Manual Download Page 242 | Manualshive

Page: 242 / 268

background image

Update the firmware

Several options are available to update the firmware for the server.

You can use the tools listed here to update the most current firmware for your server and the devices that are
installed in the server.

Note:

Lenovo typically releases firmware in bundles called UpdateXpress System Packs (UXSPs). To ensure

that all of the firmware updates are compatible, you should update all firmware at the same time. If you are
updating firmware for both the Lenovo XClarity Controller and UEFI, update the firmware for Lenovo XClarity
Controller first.

Best practices related to updating firmware are available at the following location:

http://lenovopress.com/LP0656

Important terminology

•

In-band update.

The installation or update is performed using a tool or application within an operating

system that is executing on the server’s core processor.

•

Out-of-band update.

The installation or update is performed by the Lenovo XClarity Controller collecting

the update and then directing the update to the target subsystem or device. Out-of-band updates have no
dependency on an operating system executing on the core processor. However, most out-of-band
operations do require the server to be in the S0 (Working) power state.

•

On-Target update.

The installation or update is initiated from an operating system running on the server.

•

Off-Target update.

The installation or update is initiated from a computing device interacting directly with

the server’s Lenovo XClarity Controller.

•

UpdateXpress System Packs (UXSPs).

UXSPs are bundled updates designed and tested to provide the

interdependent level of functionality, performance, and compatibility. UXSPs are server machine-type
specific and are built (with firmware and device driver updates) to support specific Windows Server, Red
Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) operating system distributions.
Machine-type-specific firmware-only UXSPs are also available.

238

ThinkSystem SR665 Setup Guide

«
...
240
241
242
243
244
...
»

Summary of Contents for ThinkSystem SR665













































































































































































































































































Reviews:

No comments

Related manuals for ThinkSystem SR665

RS/6000 7043 260

Brand: IBM Pages: 322

Brand: B&B Pages: 70

Brand: AXIOMTEK Pages: 58

SUPERSERVER 5019S-M

Brand: Supermicro Pages: 65

Brand: Altos Pages: 104

eServer BladeCenter HS20Type 8832

Brand: IBM Pages: 112

Brand: Kontron Pages: 90

Brand: Cisco Pages: 2

DPR-1260 - RangeBooster G Multifunction Print Server

Brand: D-Link Pages: 55

Brand: D-Link Pages: 49

ProLiant BL460c Gen8

Brand: HP Pages: 84

Brand: Artesyn Embedded Technology Pages: 2

StorCenter Pro NAS 200rL

Brand: Iomega Pages: 2

Brand: Dataton Pages: 11

SocketEthernetIP EN60601

Brand: Multitech Pages: 2

Brand: 360 Systems Pages: 148

Brand: Paxar Pages: 294

Brand: easyRAID Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands