Lenovo ThinkSystem SR665 Setup Manual Download Page 19

Page: 19 / 268

Lenovo Business Vantage provides the following functions:

•

Data Safe

. Encrypt files to ensure data safety by using the TCM adapter.

•

Sure Erase

. Erase confidential data from a hard disk. This tool follows the industry standard method to do

the erasing and allows the user to select different erasing levels.

•

Smart USB Protection

. Prohibit unauthorized access to the USB port of devices.

•

USB Data Safe

. Encrypt files to ensure data security on a USB storage device.

Note:

This tool is available in Chinese Mainland only.

More information about Lenovo Business Vantage is available at:

http://support.lenovo.com.cn/lenovo/wsi/es/es.html

Chapter 1

Introduction

Summary of Contents for ThinkSystem SR665












































































































































































































































































Search results

Summary of Contents for ThinkSystem SR665

Reviews:

Related manuals for ThinkSystem SR665

Brands by name

Popular brands

Lenovo ThinkSystem SR665, Setup Manual

Search results

Summary of Contents for ThinkSystem SR665

Reviews:

Related manuals for ThinkSystem SR665

Brands by name

Popular brands