Lenovo ThinkSystem SR665, Setup Manual

Page: 127 / 268

The following table shows the cable connections for all configurations:
Configuration 3: (front drive bays and mid drive bays)
Front
: one 12 x 3.5-inch SAS/SATA backplane
Mid
: two 4 x 2.5-inch NVMe backplanes
Con-
fig.
Front BP Mid BP
System board
Storage controller
SFF 16i RAID/HBA
3
SAS 0, SAS 1 Gen 4: C 0
Gen3: C 0/ C 1
SAS 2 C 1
BP 5: NVMe 0–1
PCIe 1, PCIe 2
BP 5: NVMe 2–3 PCIe 3
BP 6: NVMe 0–1 PCIe 7
BP 6: NVMe 2–3 PCIe 8
The following illustration shows the cable routing for the configuration 3. Connections between connectors:
1
↔
1
,
2
↔
2
,
3
↔
3
, ...
n
↔
n
Note:
For models that support Gen 3 and Gen4 adapters at the same slot, the illustration shows only the
cable routing information for Gen 4 adapters, the routing and connector information is similar for Gen 3
adapters.
Figure 43. Cable routing for configuration 3
Chapter 3
.
Internal cable routing
123