Lenovo thinksystem SR630, Maintenance Manual

Page: 23 / 182

Drive LED Status Description
8
Drive status LED (right) Solid yellow The drive has an error.
Blinking yellow (blinking slowly, about one
flash per second) The drive is being rebuilt.
Blinking yellow (blinking rapidly, about four
flashes per second)
The RAID adapter is locating the drive.
9
Drive activity LED (left) Solid green The drive is powered but not active.
Blinking green The drive is active.
Operator information panel
The operator information panel of the server provides controls and LEDs.
The following illustration shows the operator information panel of the server.
Figure 7. Operator information panel
Table 3. Components on the operator information panel
1
Power button with power status LED
2
Network activity LED
3
System ID button with system ID LED
4
System error LED
1 Power button with power status LED
You can press the power button to power on the server when you finish setting up the server. You also can
hold the power button for several seconds to power off the server if you cannot shut down the server from
the operating system. The power status LED helps you to determine the current power status.
Status Color Description
Solid on Green The server is on and running.
Slow blinking
(about one flash
per second) Green The server is off and is ready to be powered on (standby state).
Fast blinking
(about four
flashes per
second) Green The server is off, but the XClarity Controller is initializing, and the server is not ready
to be powered on.
Off None There is no ac power applied to the server.
2 Network activity LED
The network activity LED on the operator information panel helps you identify the network connectivity and
activity.
Chapter 2
.
Server components
15