Lenovo thinksystem SR630, Maintenance Manual

Page: 117 / 182

Notes:
• For server models with 3.5-inch drive bays, if you have only one RAID super capacitor module, you must
install it in location 1 ; if you have two RAID super capacitor modules, you can install them in location 1
and 2 .
• For server models with 2.5-inch drive bays, if you have only one RAID super capacitor module, you must
install it in location
3
; if you have two RAID super capacitor modules, you can install them in location
3
and 1 .
Figure 104. RAID super capacitor module location
Before installing the RAID super capacitor module on the chassis, touch the static-protective package that
contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then,
take the new RAID super capacitor module out of the package and place it on a static-protective surface.
To install the RAID super capacitor module on the chassis, complete the following steps:
Watch the procedure . A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Step 1. If the server comes with a tray that covers the place of the RAID super capacitor module on the
chassis, remove it first.
Chapter 3
.
Hardware replacement procedures
109