Lenovo ThinkSystem NE2552E, Application Manual

Page: 480 / 574

480
NE2552E Application Guide for ENOS 8.4
User Configuration Example
1.
To configure a user with name “admin,” authentication type MD5, and
authentication password of “admin,” privacy option DES with privacy password
of “admin,” use the following ISCLI commands.
2.
Configure a user access group, along with the views the group may access. Use the
access table to configure the group’s access level.
Because the read view, write view, and notify view are all set to “iso,” the user
type has access to all private and public MIBs.
3.
Assign the user to the user group. Use the group table to link the user to a
particular access group.
If you want to allow user access only to certain MIBs, see “View ‐ Based
Configuration,” next.
NE2552E(config)# snmp-server user 5 name admin
NE2552E(config)# snmp-server user 5 authentication-protocol md5
authentication-password
Changing authentication password; validation required:
Enter current admin password:
<admin. password>
Enter new authentication password:
<auth. password>
Re-enter new authentication password:
<auth. password>
New authentication password accepted.
NE2552E(config)# snmp-server user 5 privacy-protocol des privacy-password
Changing privacy password; validation required:
Enter current admin password:
<admin. password>
Enter new privacy password:
<privacy password>
Re-enter new privacy password:
<privacy password>
New privacy password accepted.
NE2552E(config)# snmp-server access 5 name admingrp
NE2552E(config)# snmp-server access 5 level authpriv
NE2552E(config)# snmp-server access 5 read-view iso
NE2552E(config)# snmp-server access 5 write-view iso
NE2552E(config)# snmp-server access 5 notify-view iso
NE2552E(config)# snmp-server group 5 user-name admin
NE2552E(config)# snmp-server group 5 group-name admingrp